For all enquiries : 0161 408 1155    
email : wayne@nwcustomparts.com
Home Products Gallery Competitions Terms Contact Us


Product Category : Muzzle Brakes


A2 Flash Hider
  • Mil-Spec A2 Bird Cage Flash Suppressor
  • Threaded for 1/2x28”
  • Compatible with calibers up to .223/5.56 NATO
The A2 Bird cage Flash Suppressor is the standard muzzle device of the US Armed Forces and found on most M4/M16 rifles as well as most AR-15 rifles. Our A2 Flash Suppressor is finished with a Mil-Spec Heavy Phosphate finish. Included: A2 Bird cage Flash Suppressor; Mil-Spec Crush Washer; Spike's Tactical Lifetime Warranty
£ 15.00


Alignment Set (1/2x28) or (5/8x24)
  • Different Shims for perfect timing
The Spike's Tactical Muzzle Device Alignment Set is made to replace the peel washer commonly shipped with muzzle brakes and suppressors. This kit allows you to properly time your muzzle device so it will be positioned properly on your rifle for optimum performance. Included are three different size shims; one large, eight medium, and one small shim. The Large shim is for ½ rotation adjustment as well as for barrels with relief cuts. The Medium shims each give you 45 degrees of rotation. The small shim provides even finer adjustment. Included: Spike's Tactical Muzzle Device Alignment Set; 1 – Large Shim; 8 – Medium Shims; 1 – Small Shim; Instructions Insert; Spike's Tactical Lifetime Warranty
£ 0.00


Barking Spider2™ Krink Brake .30 / 5.56 / 9mm
  • Available in .556 .762 and 9mm
  • Modular design
  • Directs all noise and blast down range
Introducing the Barking Spider™, a Revolutionary New Modular Krinkov muzzle brake by Spike's Tactical. This Patent Pending design offers many features not currently found on any other Krinkov style muzzle device. Features The Barking Spider™ is designed to redirect the noise, blast, and concussion forward away from the shooter down range. It also increases the back pressure which in return can increase the reliability in a short barrel application where dwell time has been sacrificed for barrel length. The Barking Spider™ can be used on any barrel length but it really shines in short barrel applications. The Barking Spider can also be used to increase the back pressure for sub sonic or weak ammunition. The Barking Spider™ is Modular in a way that it can accept multiple different end caps, attachments, and thread protectors. The Modularity allows the operator to tailor the weapon system for a specific application. The front end of the Barking Spider™ has an integrated striking device or glass breaker with 1 1/8" wrench slots for easy disassembly making cleaning and maintenance a breeze. The internals come out the front leaving the body attached to the barrel. This allows you to pin perm attach the body to the barrel to meet 16" OAL requirements yet still be able to disassemble the muzzle device from the front. The Barking Spider™ was specifically designed to handle full auto and high volume fire. The Barking Spider™ features a cutting edge blast cone design which is supported in both the front AND the rear. This feature not found on any other Krinkov muzzle brake eliminates the cone from sagging in extremely high temperatures. The Barking Spider™ is CNC machined on state of the art equipment using the highest quality materials available. The Barking Spider™ is 100% Made in the USA and features a Lifetime Warranty! Technical specifications: Body is CNC machined from Billet 4140 Chromoly BAR stock. It's ball dimpled to reduce weight and to help dissipate heat. The body comes pre-drilled for pinning to the barrel. The Barking Spider body is the correct length to make a 14.5" barrel into 16" OAL when perm attached. The body is heat treated and features an extremely durable Black Nitride QPQ finish. The front hex end is CNC machined from Billet 4140 Chromoly BAR stock, it's also heat treated with a Black Nitride QPQ finish. The blast cone is CNC machined from Billet H13 Tool Steel, it's also heat treated with a Black Nitride QPQ finish. The Barking Spider™ has an 8 sided hex in the rear with 3/4" wrench slots which allows easy timing and installation. The Barking Spider™ includes a thread protector which covers the teeth on the striking device when it's not in use. This eliminates the risk of snagging or damaging the threads. The Barking Spider™ also includes a 5 prong Helix flash suppressor cap which greatly reduces the flash being thrown down range. The Modular design allows you to change configurations around in seconds by simply unscrewing the attachment and screwing on a different one. We offer additional attachments which are not included. Outside Diameter - 1.4" OAL assembled - 3.75" Weight assembled - 9.4oz Available in 5.56 1/2"-28 and 30 caliber 5/8"-24. Patent Pending
£ 135.00


Crush Washer (1/2") or (5/8")
Crush Washers are used for positive tension when installing and timing a muzzle device on your barrel. NOTE: Crush Washers should not be used on suppressed weapons. Use the stainless shims in our Alignment sets. Included (1) Crush Washer
£ 0.00


Dynacomp End Cap for Barking Spider™ Brakes
Dynacomp End Cap for Barking Spider™ Brakes
£ 45.00


Dynacomp Thread Protector for Barking Spider
Dynacomp Thread Protector for Barking Spider
£ 0.00


Flash Hider Thread Protector Fluted Aluminum
Flash Hider Thread Protector Fluted Aluminum
£ 0.00


H.V.S. Blast Shield
  • Threaded 22mm x 1mm
  • CNC machined from Billet 4140 Chromoly
  • Black Melonite finish
The Spike’s Tactical H.V.S. blast shield is designed to reduce concussion and outward blast commonly found with most muzzle brakes on the market. The H.V.S. blast shield makes the weapon system a lot more pleasant to shoot without totally eliminating the effectiveness of the muzzle break itself. The H.V.S. blast shield is designed to be used in COMBINATION with our DynaComp H.V.S. or any other muzzle device with a 22mm x 1mm O.D. thread. The H.V.S. blast shield simply threads in place by hand and seats against the shoulder. It can be quickly installed or removed depending on the intended use. Your buddy's at the range sure will thank you for being equipped with the H.V.S. blast shield when your shooting next to them in a confined area! The H.V.S. blast shield also protects the threads and muzzle device when a suppressor isn't in use. The H.V.S. is NOT caliber specific, it's only requirements are a 22mm x 1mm thread to screw on to. Known compatible muzzle devices: DynaComp H.V.S muzzle brake; DynaComp (threaded for OPS) compensator; OPS INC muzzle brake; Smith Vortex flash suppressor (threaded for OPS); Allen Engineering suppressor mounts. Included: Spike’s Tactical H.V.S. blast shield; Blue Loctite; Spike's Tactical Lifetime Warranty
£ 0.00


Odin Works Atlas 5
The first ever modular adjustable recoil reducing compensator. *Patent Pending* Technical Specs Titanium sleeve. Isonited 416R Stainless Steel. Length: 2.56". Weight: 4.1 oz. 1" diameter. ATLAS 5 - For 5.56 (22 cal) 1/2-28 threading. ATLAS 7 - For 7.62 (30 cal) 5/8-24 threading.
£ 105.00


SEI Vortex Flash Hider (6.8)
  • Right-Hand Helical Flutes
  • 5/8x24” Threading
  • .730” thread depth
The Smith Vortex Flash Eliminator is considered the best Flash Suppressor on the market today and is designed for rifles chambered in 6.8mm all the way up to .30 caliber. The intended uses of this Flash Suppressor are for Precision rifles, the SR-25s, AR-10s, and similar patterned rifles. The Smith Vortex Flash Eliminator is machined out of strong 8620 Chromoly Steel, properly heat treated, and coated in a Mil-Spec Heavy Phosphate finish. Also, a great feature of Smith Vortex Flash Suppressors are their Right-Hand Helical flutes which ensure that the muzzle device will never work its way loose under fire adding more confidence to your personal rifle. NOTE: This Flash Suppressor is threaded for 5/8x24” barrels with a .730” thread depth. If you don’t know what your barrel is threaded for, please ask your rifle’s or barrel’s manufacturer.
£ 95.00


SEI Vortex G6A2 Flash Hider (5.56)
  • Patented 15-degree helix, guaranteeing a complete
  • Right-hand helical flutes will not loosen under su
  • 40% stronger than G6A1
The Smith Vortex G6A2 Flash Eliminator is based off the combat-proven Vortex 5.56 G6A1 system and is considered the best Flash Suppressor on the market today. The Vortex is designed for rifles chambered in .223/5.56 and features a 40% increase in structural rigidity over the A1 version due to it being manufactured from properly heat treated 8629 Chromoly Steel. The Smith Vortex G6A2 achieves the highest degree of flash suppression when using M-193, SS-109 (M855), and MK 262 service ammunition. Serves as a quick-connecting interface M4DC Sound and Flash Suppressors
£ 85.00


Smith Vortex Shorty- Flash Hider
  • 1.75 inch overall length
  • 1/2X28 ID Thread Pitch
Smith Vortex Shorty, Made to the same exact high quality specifications as the standard Smith Vortex EXCLUSIVELY for Spike's Tactical by Smith Enterprises.
£ 85.00


Spike's Dynacomp Short (5.56)
  • Threaded for 1/2x28” barrels
  • Machined from 303 Stainless Steel
  • Black Melonite finish
The Spike’s Tactical Dynacomp Short is a 5.56 muzzle device designed to reduce recoil impulse and muzzle climb to provide faster follow up shots. The Dynacomp's accomplish this by balancing the direction of the blast along the vertical (upward) and perpendicular planes of the muzzle to lower muzzle rise, while the end of the device restricts forward energy to reduce parallel recoil. The ports on the Dynacomp are ball dimpled for smooth expansion of gases and rapid heat dissipation. The front of the device is 0.25" thick to better handle the abuse of full auto fire. The entire device is Melonite treated to enhance these characteristics and provide a slick black finish. NOTE: The Short model will not bring a 14.5" barrel to legal (non-NFA) length when pinned. Included Spike’s Tactical Dynacomp and crush washer Spike's Tactical Lifetime Warranty
£ 100.00


Spikes Tactical Dynacomp 2 (5.56) Matte Nickel
ntroducing the DynaComp D2 (also known as the DynaComp V2 or DynaComp version 2). The DynaComp D2 is a very innovative Patent Pending design based on 4+ years of testing and feed back received on the Original ST DynaComp. Chances are you've either owned, have seen, or at least heard about the DynaComp by now. And chances are you already know how good it is. The original Dynamic Compensator (DynaComp for short) has been an extremely successful compensator in the huge market of muzzle devices for over 4 years now. We have fielded thousands of them over the years to customers all over the world. It has a stellar reputation and it's a favorite by many professionals in the firearm industry. Your probably wondering how we could make it any better or why would we even change it in the first place? Well here's why, the original DynaComp was a huge success and everyone started noticing it, then everyone started using them, then shortly after it started being copied by other manufacturers. Not only just borrowing certain design features from the original DynaComp design, but complete 100% knock offs! Some people say imitation is the sincerest form of flattery but we take it to heart around here. We have a passion for these rifles, it's just not a job to us. We spend hours and thousands of dollars developing innovative products. It's partially our fault the original DynaComp was copied because we never patented the design. So there wasn't much we could about it besides sit down and try to design the worlds best compensator. Then patent it so it can't be copied again. So that's exactly what we did. After 4 years you learn a lot about a product both good and bad. We took everything we learned over the years and all the feed back we received from the original DynaComp and applied it to a brand new design which is now known as the DynaComp D2. Features Here's are some of the improvements made to the DynaComp D2 design to set it apart from everything else: The shims/crush washer have been captured in the rear for a much cleaner look. It also prevents your wrench from getting pinched by the crush washer as the crush washer expands. No more little "nicks" on the edges of your crush washer. The D2 will come standard with a stainless steel shim kit for more precise installation but it does work with a crush washer as well. There are index lines at the 12:00 position and the 6:00 position. It's much easier and much faster to install a muzzle device using the index lines as reference points. The top index line is the quickest reference point and the bottom index line can be used as a second reference point. With these features it will be a lot easier to tell when it's timed/indexed correctly on the barrel. We have also added an 8 sided hex in the rear for wrench flats. This allows you to get a wrench on it where you feel most comfortable. This feature also allows for much faster and much cleaner instillation of the muzzle device. The D2 has progressive side ports and the front ports have been eliminated all together. We have found that front ports increased the recoil, it also didn't allow use with frangible ammo. The unique progressive side ports keep the muzzle on target and eliminate the normal up and to the right motion that the AR15 platform is known for. These side ports allow the muzzle to stay exactly where you place it even during sustained fire. We have integrated two rear venture side ports, these two ports help draw in fresh air to greatly reduce the flash or fireball being thrown from the muzzle. These side ports help keep the powder burn inside of the muzzle device verses being throw out in front of the muzzle device. This greatly reduces the muzzle flash. We also integrated a front blast baffle or blast cone. The blast baffle serves many purposes. It allows use with frangible ammo, that's a big deal because most LE agencies train with frangible ammo. Now they can train with the same muzzle device they are using on their defensive weapon. The blast cone also rolls back the blast forcing it to exit the side ports verse trying to squeeze out the muzzle hole around the bullet. This greatly increases accuracy. The blast baffle also greatly increases the muzzle devices life span. The D2 will handle sustained full auto fire, no problem. The D2 will out live a CHF barrel. So what does all this add up to anyways?? What will you gain from the D2 over the original DynaComp? This is what you can expect: - Nearly 50% less recoil - Nearly 40% less flash/fire ball - Increased accuracy - 3x more durable - Much easier and much quicker to stay on target - Faster to install and easier to install correctly 100% US Made with a Lifetime Warranty. Technical specifications: The DynaComp D2 body is precision CNC machined from 416R Stainless steel. The blast baffle is precision CNC machined from H13 Tool Steel and held in place using a proprietary method. The D2 also goes through a proprietary heat treating process and many forms of quality control. The D2 is threaded 1/2"-28 for use on 223/5.56 barrels. The D2 is predrilled for pinning on 14.5" barrels for 16" OAL. They also include a 3/32 hardened stainless steel dowel pin. The muzzle device must be properly timed/indexed. Then the barrel must be spot drilled to retain the pin. Then the pin gets drove in place and either welded over or fused in place using a Tig welded. The D2 is the correct length to turn a 14.5" barrel into 16" OAL after its been perm attached. It works on 14.7" barrels as well, but obviously your OAL will be slightly longer. The D2 is extremely effective on barrels from 7.5" all the way up to 20"+. The D2 is available with a Matte Melonite finish or with a Matte Nickel Boron finish. The D2 is also laser engraved with the Spike's Tactical Spider brand, so that you know what your buying!
£ 125.00


Spikes Tactical Dynacomp 2 (5.56) Melonite
Introducing the DynaComp D2 (also known as the DynaComp V2 or DynaComp version 2). The DynaComp D2 is a very innovative Patent Pending design based on 4+ years of testing and feed back received on the Original ST DynaComp. Chances are you've either owned, have seen, or at least heard about the DynaComp by now. And chances are you already know how good it is. The original Dynamic Compensator (DynaComp for short) has been an extremely successful compensator in the huge market of muzzle devices for over 4 years now. We have fielded thousands of them over the years to customers all over the world. It has a stellar reputation and it's a favorite by many professionals in the firearm industry. Your probably wondering how we could make it any better or why would we even change it in the first place? Well here's why, the original DynaComp was a huge success and everyone started noticing it, then everyone started using them, then shortly after it started being copied by other manufacturers. Not only just borrowing certain design features from the original DynaComp design, but complete 100% knock offs! Some people say imitation is the sincerest form of flattery but we take it to heart around here. We have a passion for these rifles, it's just not a job to us. We spend hours and thousands of dollars developing innovative products. It's partially our fault the original DynaComp was copied because we never patented the design. So there wasn't much we could about it besides sit down and try to design the worlds best compensator. Then patent it so it can't be copied again. So that's exactly what we did. After 4 years you learn a lot about a product both good and bad. We took everything we learned over the years and all the feed back we received from the original DynaComp and applied it to a brand new design which is now known as the DynaComp D2. Features Here's are some of the improvements made to the DynaComp D2 design to set it apart from everything else: The shims/crush washer have been captured in the rear for a much cleaner look. It also prevents your wrench from getting pinched by the crush washer as the crush washer expands. No more little "nicks" on the edges of your crush washer. The D2 will come standard with a stainless steel shim kit for more precise installation but it does work with a crush washer as well. There are index lines at the 12:00 position and the 6:00 position. It's much easier and much faster to install a muzzle device using the index lines as reference points. The top index line is the quickest reference point and the bottom index line can be used as a second reference point. With these features it will be a lot easier to tell when it's timed/indexed correctly on the barrel. We have also added an 8 sided hex in the rear for wrench flats. This allows you to get a wrench on it where you feel most comfortable. This feature also allows for much faster and much cleaner instillation of the muzzle device. The D2 has progressive side ports and the front ports have been eliminated all together. We have found that front ports increased the recoil, it also didn't allow use with frangible ammo. The unique progressive side ports keep the muzzle on target and eliminate the normal up and to the right motion that the AR15 platform is known for. These side ports allow the muzzle to stay exactly where you place it even during sustained fire. We have integrated two rear venture side ports, these two ports help draw in fresh air to greatly reduce the flash or fireball being thrown from the muzzle. These side ports help keep the powder burn inside of the muzzle device verses being throw out in front of the muzzle device. This greatly reduces the muzzle flash. We also integrated a front blast baffle or blast cone. The blast baffle serves many purposes. It allows use with frangible ammo, that's a big deal because most LE agencies train with frangible ammo. Now they can train with the same muzzle device they are using on their defensive weapon. The blast cone also rolls back the blast forcing it to exit the side ports verse trying to squeeze out the muzzle hole around the bullet. This greatly increases accuracy. The blast baffle also greatly increases the muzzle devices life span. The D2 will handle sustained full auto fire, no problem. The D2 will out live a CHF barrel. So what does all this add up to anyways?? What will you gain from the D2 over the original DynaComp? This is what you can expect: - Nearly 50% less recoil - Nearly 40% less flash/fire ball - Increased accuracy - 3x more durable - Much easier and much quicker to stay on target - Faster to install and easier to install correctly 100% US Made with a Lifetime Warranty. Technical specifications: The DynaComp D2 body is precision CNC machined from 416R Stainless steel. The blast baffle is precision CNC machined from H13 Tool Steel and held in place using a proprietary method. The D2 also goes through a proprietary heat treating process and many forms of quality control. The D2 is threaded 1/2"-28 for use on 223/5.56 barrels. The D2 is predrilled for pinning on 14.5" barrels for 16" OAL. They also include a 3/32 hardened stainless steel dowel pin. The muzzle device must be properly timed/indexed. Then the barrel must be spot drilled to retain the pin. Then the pin gets drove in place and either welded over or fused in place using a Tig welded. The D2 is the correct length to turn a 14.5" barrel into 16" OAL after its been perm attached. It works on 14.7" barrels as well, but obviously your OAL will be slightly longer. The D2 is extremely effective on barrels from 7.5" all the way up to 20"+. The D2 is available with a Matte Melonite finish or with a Matte Nickel Boron finish. The D2 is also laser engraved with the Spike's Tactical Spider brand, so that you know what your buying!
£ 125.00


Spike's Tactical Dynacomp Extreme (.308) or (5.56)
  • Threaded for 5/8x24” barrels
  • Machined from 303 Stainless Steel
  • Black Melonite finish
The Spike’s Tactical Dynacomp is a muzzle device designed to reduce recoil impulse and muzzle climb to provide faster follow up shots. The Dynacomp's accomplish this by balancing the direction of the blast along the vertical (upward) and perpendicular planes of the muzzle to lower muzzle rise, while the end of the device restricts forward energy to reduce parallel recoil. The ports on the Dynacomp are ball dimpled for smooth expansion of gases and rapid heat dissipation. The front of the device is 0.25" thick to better handle the abuse of full auto fire. The entire device is Melonite treated to enhance these characteristics and provide a slick black finish. Ball dimpled expansion ports Weight of 2.42oz w/Crush washer
£ 125.00


Spike's Tactical Dynacomp Extreme OPS Inc. S(5.56)
  • Threaded for 1/2x28” barrels
  • Machined from 303 Stainless Steel
  • Black Melonite finish
The Spike’s Tactical Dynacomp is a 5.56 muzzle device designed to reduce recoil impulse and muzzle climb to provide faster follow up shots. The Dynacomp's accomplish this by balancing the direction of the blast along the vertical (upward) and perpendicular planes of the muzzle to lower muzzle rise, while the end of the device restricts forward energy to reduce parallel recoil. The ports on the Dynacomp are ball dimpled for smooth expansion of gases and rapid heat dissipation. The front of the device is 0.25" thick to better handle the abuse of full auto fire. The entire device is Melonite treated to enhance these characteristics and provide a slick black finish. Threaded For Use with OPS Inc. Suppressor Models M4S,12th,14th,15th,16th, Maybe More. Included Spike’s Tactical Threaded Dynacomp and Muzzle Alignment Kit(Shim Kit) Spike's Tactical Lifetime Warranty
£ 125.00


DIGITAL MARKETING DESIGNED BY iMarketingDesigns.com
Copyright 2014 - All rights reserved